line 貼圖繪製設定-使用CorelDRAW X8

line 貼圖繪製設定-使用CorelDRAW X8

Currently LINE maps trafficking, there are three Static mapping, dynamic mapping and themes The basic setting for the first static map presentation Need to prepare three different formats of images The main picture and chat rooms require a label each picture Map picture is at least 8 up to 40 The format size of 370X320 (pixels) Begin when drawing pixel size (px) units Image format is PNG Set picture resolution 72dpi more color mode is RGB Would suggest the actual rendering resolution set higher I personally like to use 300 as draw a good pattern can be used as a printing output When you upload to LINE, as the case may be changed or 150 96 Because single file can not be greater than 1MB Blank space around the image to the left and right up and down the left 10PX The above is the basic setting of the main map pictures After the part is not mentioned again that will Come to look at the actual settings do CorelDRAW Open CorelDRAW (version here is X8) Point "New File" Or the top menu bar of "File" -> "Open File" can also Name -> This file is your file name, then you can also set But uploading pictures do not recommend using Chinese file name, When you export a file to upload and then change it in English or digital Width of the units are in pixels of 370 Height of 320 Pages will be able to choose one (after possible increase) Use RGB mode, the resolution is set to 300 Other settings do not Press OK on it The main figure is then drawn in each layer All common set of graphics on the home page Prior to remember that each up and down to stay 10px So first to draw a reference line (PS argument) Lane called wire CorelDRAWl Using the Rectangle tool, free to draw a box The size is about 350×300 down to each Save 10px Press the keyboard "P" painted graphics files will be placed in the middle Note that English is the P, if used Chinese input method, according to the will did not respond To remember that in exchange for alphanumeric input The box draw a good pull "wire" in and locked At this box will be blue (default) Since the wire will not have to set the output, so the final figure is not appearing To switch to a layer when you want to start drawing graphics Press Ctrl + E can export graphics Painting has good graphics will be automatically resized, But this will make graphics irregularities So we have to specify the size to it @ The following practice is my personal habits, if there are other practices, please share with me ^ ^ @ Then use the rectangle tool to draw a box Size is 370×320 Similarly Press "P" center The drawn rectangle is set to no coloring no frame Press the right mouse in "X" set to fill the place left to None Press the right frame is set to None Under this rectangle pulled the "Home" in the "Desktop" Locked to prevent inadvertent changes to the At this time if the graphics do a good painting export Graphics or automatically adjust Enabled desktop print and export (Red on the prohibited character pattern dot off) Then do export, the size will be limited to 370×320 Of course, still have to be careful not to paint over This completes the basic settings before drawing Other portions of the drawing, you say next time ^^ I thank you for watching wheat ^^.

Source: Youtube