Criando um flyer de negócios com CorelDRAW

Criando um flyer de negócios com CorelDRAW

What's up guys! Welcome to another Video Club Channel Design.

Here the speaker is Liute Cristian.

And today, we begin a new series of videos on the channel.

Even with that footprint I I promised you, the video 100,000 subscribers.

Where in each day of the week we work with a different application, and we have one class a day.

From now on, we will work with instructional videos where I'll show you, creating graphic designs.

We will work with themes that are suggested in our Discussion Group on Facebook.

So if you have not joined, click the link that is down here, in the video description, to participate in the discussion group, where all week we will decide what kind of people the project will work, and probably Also, what is the theme that we will be working in these classes.

How it will work this series? Playlist that we will have from now? We go choose a theme in the case: Flyer, Pamphlet, Poster, Business Card, so.

We'll work on this type of project during the week.

So I'll show you the From now on, this video today for example, how to create this Flyer what you're seeing here on my screen.

Flyer is a simple, but I will show you how to create this using the Flyer CorelDRAW, tomorrow, create the same Flyer using Photoshop, then using the InDesign, and then using Illustrator.

So, we will work with each of the applications individually.

Probably, we use some support application, as is the Photoshop if that is our image editor.

And I'll show how you can create the same design in all applications, one at a time, so you know each tools used in each of the applications.

Their quirks, their differences, and how to work with each of them.

First, I want to apologize for frequency of the videos.

Although I am unable to publish on Monday, of the Corel on Tuesday not, being in the Fourth, so.

Though I'm not following the essential schedule, the one I suggested, you have a video for every day of the week.

Even though delayed skirt.

If you notice in the videos I published during the last few weeks, you will see the time that I usually write between midnight one hour, two hours.

Actually, it's pretty hard, I get very tired from work.

So, for to account for the videos, being quite tiring it.

But I'm making an effort to you can learn, and we can continue with our work.

So before get this video, I want to make some considerations before starting this series.

This will be the first video, the other I will not talk much, I'm ?! Forgive me for We are talking much in this, but I need to clarify a few things.

First, before I forget, do not forget to enjoy the video, okay ?! I know it will be a little boring in start, but likes the video, share, help the work, share on Facebook, Instagram, Twitter takes the link there to WhatsApp and share with your friends.

Why like that, you give me strength, and we continue this legal work.

Well, then the purpose of these videos is not to show a tutorial on how you will create a Folder a Flyer Flyer or, for you to use in your business or for your client.

The goal this is not.

We will use reference models.

And these models will be available for download for those who are beyond the subscriber Club Design.

And you will in Indeed, learning how to use the features of the applications, to create any type of project.

We will use sample projects, we create our own models, using other reference models.

But the goal is not to give you a ready cake recipe.

What am I going show you, for example, in this video here, I'll show you how to use Grids and how to use color styles for you to improve your workflow, and create a much more beautiful design, much more attractive, a much more consistent design.

When I refer to color styles for example: When you use color styles in CorelDRAW, or any other application that we will work from now on, you increases your chances, especially change, editing, make corrections in your project, for example.

You notice here, I made a red and blue design.

But we I assume that my client, to whom I presented the proposal, he did not like result.

Ah Liute did not like, I want those pale blue letters, I do not want red.

So what can you do when you work with color styles? You simply select the color style here in CorelDRAW, and you can make the change to the color you want.

Look that! All the elements that received one color style I created, I worked, they change color instantaneously, all at once.

No need to get selecting, I do not need to keep changing color by color, anyway.

I can use the color styles, and work perfectly with my objects, editing, modifying, of so much easier and therefore much faster.

Then you already realize the advantage: Oh, I do not want a dark blue background, I want a lilac, I want a red, I want a brown, I want a yellow.

Then, you can use these color styles to work with changes, with way more projects consistent, much cooler, much more practical, much easier.

So that's our goal.

Not to give you a step-by-step ready, and yes, show you how the tools work, so you can use it in favor of their work in favor of your project to help you in your workflow.

So, we will create this project during this week, today in CorelDRAW, tomorrow in InDesign, then tomorrow in Photoshop, InDesign and then later in Illustrator.

So let's follow how we get to this kind of result.

Detail: In this project, I used a grid.

although it is not listed here, it's here on the front page.

I used a Grid, a Grid simple modular.

And we will use the same grid reference.

The Grid, it is not a rule.

You do not need to set all of its elements in a grid.

Although using a Grid, you have a much better consistency, distribution of its elements within the page.

And you can create more beautiful results, much more harmonics.

So, we will use some grid concepts to position mainly to align and position the elements on our page.

So let's create our project.

I'll click here on File, New menu, and I will create a new document in CorelDRAW, using the CMYK default option default application.

An addendum, is that I'm using CorelDRAW X6.

Some resources may be one little different from the X7.

But if you use the basic workspace, the classic Moreover, you will find most of the features in one place.

After I created my document, I will change here guidance.

Or rather, the size my paper to A5.

And I will mark Align the guide lines.

Then I will change the My shift to 10 mm.

I like to work with millimeters.

If you like work with feet: 0.


If you enjoy working with meters, 0.


And so on, are only measurement units does not mean much.

So did the setting, before proceeding, I'll show you here, the image I'll use this Flyer.

I will use a picture of Shutterstock.

The link will stay here in the description of video.

It is a paid image, but you can use any other image, for you to practice.

You can get there on Google, search for Business Man or Businessman on Google, and filter for large images, for you only practice.

Just not going to use this image in a job commercial, you're ?! Use images from image banks, buy the pictures by the way, for their customers.

Do not use the Google images.

Well folks, then I moved here, I made the initial settings.

The first step will be to establish the guide lines or my grade document.

For this, I'll basically use guide-lines and some objects.

I will close here beside the painelzinho, so that we can open it together.

To do all this, I'll need two key panels, you will always be using here in During this video.

We will click here, on the Window menu, Windows Fitting, then in Object Explorer to open the window Fitting Management Objects, Object Manager.

Object Manager actually shows layers that you have in your document in your project in CorelDRAW.

If you did not know, the CorelDRAW also has been working with layers for a long time.

In addition to the Object Manager, it will open the Color Styles fitting small window.

By clicking on the Window menu, Snap windows, and here you will select the Color Styles option Ctrl + F6 is the shortcut.

Beauty! Then we will draw our grid.

Remembering that I've modified herein, the alignment to align the guide-lines and my shift 10 mm.

I'll give-click the Rectangle tool, to create a rectangle the size of my page.

And then I will drag the guideline from the upper ruler.

I will stand here on the side of my rectangle, and press down on my directional pad to move the line down.

Another addendum: This is the flow my work, I use.

You can create predefined guides, you can use other resources, you are more used.

This is not a rule, will you people ?! I am showing how I would do.

So if you do it another way, beauty! No problem.

The important thing is that we can achieve the same result and can use resources the way we think more convenient to take good advantage of them.

Then I'll drag here each sides, a tab positioned on the side and moving with the directional pad inside.

In case, I'll pull down here and press up.

After that, I'll drag, I'll create my grade, my grid for this project, using the Graph Paper tool.

I will click and hold here, the mouse button to expand the group, and I click on the tool Graph Paper, which can be triggered by pressing the keyboard shortcut D.

My grade, she will have six columns and nine rows.

So it's a 6×9 grid, so to speak.

It is a simple modular grid.

Then we will add other elements that will transform him into a grid a little more composed.

So, after setting up my tool, I will use the built-in tabs that I just entered.

I'll click and drag to draw my grade, my grid.

And then you throw that Question: But I can not use the tool table? Well folks, I need not say that it is Obviously you can use any tool that delivers you this result.

I will use the graph paper because I like to use graph paper.

You can use the Table tool? You can! But the result is a little different.

Mainly by the You will need, which is to convert this format here in tabs.

So after I draw the my grill, I'll convert those objects.

Note that they are objects, so they are rectangles.

I can even ungroup and move them individually.

I convert these objects into tabs.

How do I do that? In the object manager, you may notice that when you select these objects here on my page 1 and Layer 1, I have here a group of 54 objects.

For I convert these 54 objects in guides, What are these squares bloquinhos, I will drag them into the line-guiding layer.

Ready! They were there.

If I take the selection and you give a zoom, you will observe that they were bluish.

So these squares are already guide lines.

After converting my rectangles guide lines, I'll drag a guideline here to the middle.

I'll just change here my shift, to 5 mm.

I'll go later Select this tab, and move it to the left side.

The same thing then, I'll put a new guide here in the middle, and direct it to the right side.

Then I have a small margin in the center of my document.

Then all I need to do, is block my layer lines guide.

Because until then, I can not move the objects They are inside it.

This will hinder me.

So I'll block this guideline by clicking here this pencil.

Ready! From now on, I can not more, move the tabs, just in objects.

Let me press the P, to align the object in the middle of the page.

Then, as I already have a page size of the rectangle, I'll make a copy of it, pressing the + (plus) sign, in my keypad.

Not worth the + (plus) here, the alphanumeric keypad, which is near the Backspace here, the 0 (zero), this is not.

It is the keyboard numeric.

Then, press the plus on the numeric keypad, or if you use notebook, is already a little harder.

You probably will need to use the key FN function.

Then, on the numeric keypad, you can use Ctrl + C, Ctrl + V, if you have not a numeric keypad.

Then I'll drag one of the copies to the left to decrease she.

And then another copy, I will reduce it considering the right side, thus creating two halves of an orange, no! Two page halves, okay ?! From now on, I can start working with my colors and my color styles.

For this, I will select my first object, which is the rectangle on the side I left my document.

I will here in color styles painelzinho in window plug-in color styles, and I click here in the Style option, New Color Style.

I will select the color style that I just created, and choose the color that I see fit.

I'll put here, a more bluish Bluey here apagadinho middle, not too blue.

And then, I'll give two clicks in this style to the selected object, to apply the color to that object.

Note the following: Down here, I have my palette documents.

This paletinha, it displays all the colors that I work in a document.

If you do not see this color palette, it is available from version X5 in CorelDRAW.

You can view it from the Window menu, Palette, Document Palette.

I like to leave it down here, so it does not bother me, ready.

So from when I used the first time the color style, he is already down here, so I can apply to other objects more easily, giving just one click.

Then I will remove the outline that my rectangle, click on the right button on the option No Fill.

Next, I'll select the rectangle on the right, I'll click the New Style option, New Color Style, and then I will select him here on the side.

I will change his color to white, and voila! I will give two clicks to apply it to my object.

And he has comes here down.

And I will take the outline by clicking right here.

You can show or hide the guide lines at any time, using the manager objects by clicking this little eye here, using the View menu lines guide, or you can do like me: Assign a keyboard shortcut to the command Show or Hide Rows guide.

on the menu View, you notice that my radio show and hide guide-lines, it has a shortcut Ctrl + ;.

IT IS because I'm used to using this shortcut Illustrator, InDesign, so, I assign it in CorelDRAW also.

To assign this shortcut, right-click right, Customize, Menu Item, Properties.

Then, in the window of options, click Shortcut Keyboard, click here in New hotkey option, type the shortcut you want, and click To assign.

It will show you down here if that shortcut already belonged to another tool.

It is not recommended that you use, if it is already occupied.

So Ctrl +; I hide and show this much easier my life.

So I've created these two objects to save time, I will copy here, my original design my logo.

You will use the your client's logo.

I'll just paste it here, and then I will apply the white color style it, so that it receives the same style my document.

Here, I ended up having a small little problem, the object here is not filling, it is only outline.

Ready! Of that way, I have my logo.

In this logo, they have been used only sources Arial and Arial Narrow, as you prefer.

So, we have a well phony logo, only to occupy space there.

You will use your logo, your customer's logo, if he marries well with this type of layout.

Then we'll now begin to enter our texts.

Again, to save time, I'm here to copy text that we already have the original Flyer.

I will open here Notepad.

I will not be typing text, even because the goal not It is to teach you typing.

With the text tool, F8, I will click on the screen and paste the text I have ever I have.

You can type.

And then I'm going to place this text using my guides as reference.

I'll place it here in this corner, using my grade.

Then I will set a size for it, it will be size 16.

So I'll use as a reference for alignment, the top and the left side of my grill, my grid.

Next, I will select the text of the first top line of text, and will create a new color style.

Click here for Color Styles, New Style, New Color Style.

And from the here, I'll create a style with a very light red little not to get too dark.

Then I'll give-click it to apply the style to my object.

I do the same thing with the down text, as I have the style here, ready! He will have to apply directly.

And here, I I'll paint with white style.

I can already note the following: I've start to enjoy the advantages of working with color styles.

For example, I will hide my here guides, and you notice that he was half hidden, opaque blue that.

So I can or decrease the shade of blue to a lighter blue or darker, the way I find it convenient.

Or I can also leave this my color style, red with a saturation higher, a lighter shade.

I'll use here, just edit that style, to make it more pale.

If I want to change the white also, no problem.

I can change too.

Everything will change color, as I change my color style.

Let me leave it white here again.

From there, all we need to do is go inserting texts.

I will copy and paste here because I do not want to waste time, not I want this video to be longer than I'm already predicting that it will get.

Then I go just pasting the text here.

You'll typing, will using the sizes you sees fit.

I will use here a size 10, I will place it here on the low this guideline.

10 was cool.

Style, white.

From here, I I'll draw another line guide, using the center that my rectangle.

Then I go add a module, a subdivision in this module here.

Just to explain to you, I I forgot to explain: In a grid, you have various types, various formats, various styles grid, which you can use in a project.

This grid we are using, is one of simpler.

It's what we call modular grid.

Where you have a sort of table.

And each of these squares here, are what we call modules.

Cells are a table, for example.

Here, we call modules.

There are modular grids, grids hierarchical modular grids compounds.

So there are actually several types of grids, the We'll explore in the course of these videos, from now.

This one is the simplest and the most basic, and also the coolest to work with.

I pulled one grid here using half of the middle rectangle here.

And I'll pull another grid in half that other rectangle down here.

Ready! Then I'll have there, a 2 modules space, only that using half of each other, up and down.

Then, with the Text Tool, I'll click and drag to draw a text box.

I'll get the Selection tool, without writing anything.

I will change here, the formatting of that box 8.

I'm going to paint the text with a white style, is down here.

Ready! And now, I'm going to click Right, and select Insert Placeholder Text option.

In this case, I'm using a text placeholder.

A sample text.

Of course you will put your text there.

Ready! Just to save time.

From there, I recommend you save.

Greatly recommend that you save.

I'll save here, named Flyer Business 2, CorelDRAW because there is not a flower that smells relative stability.

So I have saved there, to ensure mine.

From now on, we can now move on to the issue of our image.

I go here in my briefcase.

For this, I will using an external application.

I'll use Photoshop.

Because it is much easier and more quick to do image editing in Photoshop.

I will use it, just to make the removing the background of this image.

Obviously, of course, that image, it has the white background, which greatly facilitates our lives.

Remembering what I have come speaking in Photoshop course, the image, it needs to be photographed thinking about the end result.

Nothing to pick up any image with the background chess, checkerboard, or the guy in the jungle, and find that you can do miracles.

The photographs are made thinking about the end result.

You can do a lot with Photoshop, change background of very complex images, but remember that it does not do miracles.

Much will depend on you and your technical team.

I'll use here, ninja selection technique, which no one knows who is the Magic Wand.

I'll put here, a 40% tolerance, and click here at the bottom, only to select that background right, well dog way.

After selecting the background here, the first Deep down, I'll click the Add option here, and I click here between his legs.

Then I I'm here, my image selected.

I have here an area that ended up others selected.

I do not want this area to be selected.

So I'll press the Ctrl + D to deselect, and will decrease the tolerance here for 15.

I'll select again.

Now no longer caught.

So, I click down there, between the legs his.

After all that, I need to improve this hair selection, because it will be ridiculous if I leave this way.

I'll click here, the option Refine Edge, with the wand tool magic still on.

If you have exchanged tool, you can click on the Select menu, Refine Edge, the shortcut is Ctrl + Alt + R.

Then with pincelzinho the Refine Edge, Alt and the right mouse button and I will raise this brush sideways holding Alt and click on the right.

And dragging down, I will increase here, the opacity of it.

I will leave it about that size.

Then I'll drop all the keyboard, and I click and Drag here on the side, to refine the selection.

I can see the result by clicking here on the option View Mode.

The Refine Edge, is a tool to refine the selection.

So if you do not know very well how it works, I recommend strongly that you watch our video, our playlist of Photoshop.

Where I show using this type of resource.

And down here, I'll use the Smooth option, I I'll put here 2%.

Down here, the Shift Edge, is to contract or to expand our selection.

I'll put here +2.

And then down here, I will select the output option, to Layer Mask.

Smooth This will soften the edges of the selection.

This Shift Edge, will cause it between more or she most leave the floor area selected there, my character from my image.

Here, the Layer Mask, actually I'm going use here, new layer and layer mask.

Will make a copy of my original, with the bottom removed through a mask.

Instead of erasing the background, I'll just hide he.

Then I will select this mask if So here it ends happening.

Select the mask and take a Ctrl + I to invert my mask.

And from there, look at that nice selection that I have, my character.

If I want to further refine the selection, and see how that is the result, I can create a new Background layer here, and paint it black.

My foreground color and plan fund is strange here, it's a gray and red.

I will press D to reset these colors.

And with the Layer 1 layer selected, I'll press Alt + Delete to paint this my background layer.

You notice that I have here, a selection one little strange.

In the beard, then what will I do? I will select this mask, give-click it to open the little window properties.

I'm using Adobe Photoshop Creative Cloud.

From CS6, this little window here begins to appear.

After, I'll click on the Mask Edge option, will open the same little window.

From there, I can reduce my brush holding Alt and clicking the right button.

Give a refined here in this corner.

He will do the refining.

Then I'll refine here on this side here.

How neat.

He goes refine this side here.

And now, to improve this shadow means whitish who was down here, I'll use here, the option Shift Edge, decreasing, so that it enters a little inside.

Enter into it was great, huh ?! Doing this, look that! I'll click on OK.

Layer Mask is already there enabled.

Ready! I have here, my usually layer mask.

I can still improve this part of the hair, using the brush and my layer mask.

For that, I press the B, to trigger the my brush.

If I paint it white, I will display the original image.

Remembering that I am here painting the mask.

What if I paint it black, reversing the X here in my color of the plan, I'll hide.

Then, using the brush, a smaller brush and a softness slightly greater at the edges, I'll smooth out here.


Cool down.

Let me take a Ctrl + Alt + Z, I need to paint in white to show here, some areas of my image.

So the goal is not to let this cut so ugly, so sloppy.

Of course he will not appear, because we will put it in a colored background.

Something like the result we expect.

Then I will remove this background layer.

And I will save the Ctrl + S.

I'll save a picture here, _2 (underline two).

I can save in PSD format without problems.

CorelDRAW will import the image properly.

Even with a mask layer.

I will come back here for my briefcase and I'll get the picture that I just cut in Photoshop, and I put it inside my project, Ctrl + V.

Ctrl + C, Ctrl + V base.

if appears little window color management, we will give an OK, you're not working with him for now.

And then I'll now resize my image.

Put it in the size I want, go! In fact, as was the size exactly what I needed right ?! With the person here in the middle.

Note that my team has not It is really cool.

You can refine it.

I will not waste time on it now, you can give a refined there in the selection, instead of using the magic wand, use a selection different.

But the goal is that you understand how the business works.

After that, I'll hide here, my guideline, and will shape this text box here ago, so that it passes below the outline of my character, my image.

First, I select the image, press the Ctrl + Page Down, so she retreats back of my text.

You may need to press more than once.

So Ctrl + Page Down it goes back, and Ctrl + Page Up, it will move forward.

Then I'll select that my text block, I'll click here on Effects, Envelope option.

And from there, I'll click on Add New.

THE From that moment, I can use the envelope tool to shape this my text box, so that it is around my image, my jacket face.

I will do about it here, using the Shape tool to move the format that image.

You can use Shift to improve your movement.

And using the Shift, I I will drag down here to raise her down.

Here, I ended up putting too much text.

So I'll just delete this text here it's in the end.

I ended up putting that information was not necessary.

Ready! And so, I I have my text box that molds around my character here, my image.

You you can use the shape tool to change the way you want.

I want it here in line, okay.

I want this node here Cusp.

Just like you edit a node in CorelDRAW, no secret, no difference.

From there, everything else will need to do is just go adding text, adding our ways, then I will give accelerated here, so that we can work faster.

Then I have here is a little balloon 50% off, I'll draw it for you to see how it was done.

I used as a reference, this module, these four modules here my grade.

I will draw my rectangle here.

Ready! He will stand in front.

After, I'll paint it with my white color style.

And I will change here, the corners of this object for 3 mm.

Then, 3 mm in each corner, it will round the corners.

I will take contour, and voila! It's done.

Then I'll copy the text there, because I am a very lazy guy.

50% OFF, Limited Time Offer.

I will copy here, and necklace in my notebook, because I do not want to take the trouble of typing all over again.

Ready! I'll paste this text here in CorelDRAW.

Note that the text came all juntinho, all cute.

I will press the Ctrl + K, to separate it.

And from there, I can work in here, my balloon.

I will use an Arial Bold.

Place here, text in Vermelhinho.

Then I'll use that text down here.

Here, I'm going in olhômetro, to make them more aligned.

And down here, the same thing.

Put this text in bold as it will get smaller.

I do not remember if I used two lines, no! It was only one line.

And it is with Arial Narrow.

Ready! Select everyone here, these three texts, C give to align them in the middle, paint them all with my red color style.

Then I I simply group all the world, centralizing it in my rectangle.

For this, I simply grouped them.

Holding Shift, I clicked here on my rectangle.

After, pressing C, to align them horizontally and E, to align them vertically.

From there, I can improve, I can ungroup here and use the Arial Narrow Bold.

Make it bigger.


I'm not a fan of stretching the source, so I'd rather use a font it is condensed, it is stretched.


Group worldwide.

Center again.

THE You have this result there.

Then we have down here, a little way that is stretched.

For this, I will use two rectangles.

I'll use here, a rectangle normal until about that size.

I will use again here, the three of rounding mm.

I will press the Ctrl + Q, to convert it into curves.

And then, with the selection tool, I'll take one more click on it to enable here, deformation that object.

And then, I'll click up here, to tilt.

Until about this position.

Until it is at about this position.

Put here in the corner.

Then I'll draw another rectangle here, using this as a side reference.

Until it overlaps the rectangle that I have down there.

Let me hide here, my guides, and I will have then will paint here with a Vermelhinho for you see how I do.

I have the first way that I stretched, and the second way is the rectangle, I'll round the corners to 3 mm.

Then I'll select both and will weld, for I have that bigger way, we saw there.

Then I will select and paint with the color style I want.

Taking the shape and ready.

I I do not know if this color I'm using.

Let me see how is the situation here.

I'm doing everything backwards, right people ?! Let me come back here, this here actually use the style orange, and this, use white style.

Here in my source, I have everyone in bold.

Up here, everybody is in bold.

Then obviously I will use here, the famous copy and paste.

To paste my text in the position I want.

I'll be more roguish yet this time.

I'll just copy the entire text box, for entering text, you already They are bald to know how you do, I'll just apply the style here and ready.

Look at the result.

To add this QR Code that we are seeing down here, I used a site even Google.

I used here, QR CODE.

Ready! I I used this site here, Brazilian CODE QR generator free.

You can use, I used the Design Club same site, to generate the QR CODE.

If you want to use, then just access this address there.

I put here: http://clubedodesign.


Create QR CODE.

Ready! So, here you click Download.

Before you create the registry, you can ignore, just close that it will soon go down then.

Let me download here again.

Come on.

Ready! It will download.

You save after you import it into the CorelDRAW, and places here, as you see fit.

He lowered twice.

Beauty! So that's basically it.

Now we have other texts too, here at the top.

We have here the textinho who stayed here at the top, which is the same thing.

It's just text input.

So I'll copy and paste.

I will use here, the color style that we already have in our document, in our project.

Let me see how it is here.

Here in my case, My image is smaller.

I decrease it until it exactly fits this part of my grade, my grid.

Or center it here using this reference.

So it's like this.

Then I took the same way down here, it duplicated the + (plus), and positioned it here.

Just turned it.

Dei here reflect one so she become smaller.

And I could use her back here.

In fact, I made another way.

I drew again, the two forms, using the same technique I showed you there now little.

An inclined Dei, and then drew a second embodiment, I use the rectangle to round, then I selected the two and let.

I'll put it back in my face comrade here.

Ctrl + Page Down.

Repeatedly until it down.

Ready! You can not go down too.

Ctrl + Page Up, I rise again.

So, I'll paint it with this style here, and draw the outline.

Look at the end result, as is getting cool.

Then I will select here, my textinho I want to steal.

I like to paste into Notepad, it is a craze I have.

For him to lose formatting, so it does not come with formatting it come as plain text.

Then I just lap in CorelDRAW, and he is not asking if I I want to keep formatting and etc.

Ready! I'll use here, this object to align it to center.

Let me select both "E" to align them vertically.

Ready people! Thus, we concluded our work.

just missing my QR CODE here, which was half-forgotten.

Then, once we conclude our construction work this Flyer, using CorelDRAW, and using the grid resources.

We have lined up objects, using a grid.

So, we have a structure that served as the basis for us build this material, which will align the objects, will distribute them evenly in our work, and you have a very cool and very nice consistency.

You see that design is more beautiful, is better organized, because we worked with a minimum structure, which allows us to reach this result.

We also use the color styles, which allow us to have there, much control most of the changes we can make this project.

So, we can reverse colors completely, if convenient.

And is an advantage offered to those working with styles, both colors, the styles of objects, we will work on another project type, text styles, like we saw in the last video CorelDRAW Course.

And so, on.

I hope you have enjoyed this result.

If you subscribe Club design, this file is available to you download.

Then, in the area Premium Club design.

If you are not yet a subscriber, know you can become a subscriber.

Just follow the link here in the video description, or Direct visit: clubedodesign.


When you become a subscriber, in fact, you are voluntarily contributing, so that our work continues.

And in return, I give you some files, give you some cool items there, for you to enjoy the advantage.

Then that's it.

If you like, do not forget to give your joinha.

To give your like, give your liked it.

And do not forget to share this video also in their social profiles.

we It will not end, in fact, we can even finish the file.

All we need do was add the sangria, I'm going to show you now, as you do.

We close the file right ?! We are going to close! I can not leave the incomplete file.

I will add the bleeding in my project, using the form tool.

It is one of the techniques that you can use.

If you do not know what sangria, gives a sought there in club design, I speak specifically only about sangria, at least 3 articles.

So, give a peek there to facilitate I can even leave the link.

But it was the last video Illustrator, I left the link bleed and safety margin, anyway.

The safety margin actually is just this one centimeter of space left.

Now I'll add the bleeding, which is an extra space on the outside of my document, the background.

How do I do I add bleeding in CorelDRAW? I'll set up here, my shift 3 mm, a bleed of 3 mm.

Using the shape tool, I'll select that rectangle here, which is actually the rectangle that matches my background.

I will convert it to curve, by pressing the Ctrl + Q.

From now on, I can edit nodes I individually, not in fact the corner rounding, if I had not converted it into're curves ?! Then, Ctrl + Q converted into curves.

From there, I'll do? I will select these two nodes up and press up.

Then I go move, I'll raise that my rectangle, so that it is 3 millimeters beyond my page area.

Then I'll do the same thing here, with my white rectangle.

Ctrl + Q, ah but it's not showing up! But, do it! Trust me! Make sangria, even if it is transparent.

So what I have here folks ?! So that you can see this in practice, I'll click here View, View Bleeding.

So I have here, precisely the page area, which is dotted this area.

So that here it is dotted, is my final result.

It's like my flyers will look like after cutting.

And that part which is to outside, which it was precisely the area that I just add, is what we call bleed.

This area will be cut off, it will be discarded.

To avoid that in my background, I has white edges.

A question that is very common that the staff speaks: Liute, but I have, I want to print my poster in A4 paper, but it's getting white border.

People! The margin your printer is different from bleeding.

Not every printer can print borderless.

If you go to a job with sangria note that this material was made in A5.

He will be printed in a larger role.

It will not be printed on A5 paper.

It will be printed on larger paper.

For example, an A4, so to speak.

I will print it in A4 paper.

And then, from crop marks, it will be cut, and bleeding will be eliminated.

Now, how do we will finalize this project ?! Although I do not have me concerned about the issues of styles colors, color profiles by the way, I'm going to use this project, you can finish him very simple, very easy, using the PDF presets, CorelDRAW.

As thus Liute? All you need to do people actually It is a piece of cake.

All you need to do to close this type of material, is click Menu File, Publish to PDF.

And from here, you select the default PDF / X1A.

Okay, that's all you need to do so that your PDF has the settings necessary for a graphic can print to a bureau can generate CTP's.

Obvious that here also involves some issues color management, we will not see now, it is a very extensive subject.

But, so here, since breaks a galhão.

Clicking Configure, just to add here the tab Prepress, crop marks.

I can also add, my bleeding limit, which was 3 mm, do not forget it.

Then I'll click on OK, and I click here Flyer Business Save.

Just so you see the result.

I saved the PDF / X1A, added the cut marks, and see the end result, which is that cool.

And is So here, you need to arrange for the printing.

Look how nice it is.

My pamphlet, bloodletting, cutting marks.

That's what the graphic gets, folks.

We have in fact, those niggles: The graphic or in Corel.

Unfortunately, this is one thing you still You have to deal with.

But, most of the large graphic, graphic deem that respect, so to speak, accept PDF, and if you send PDF / X1A, they will give you a kiss on tests because it is the ideal standard, so it can print.

And, we will handle color management on more up front, it is not important to the right now, but if you do it this way, and export to PDF / X1A, the color variation will be minimal.

We will not have as much color difference variation as well.

So much so that the result you see here, you can see it's a pretty cool result.

We did not have a variation of colors very apparent.

Look that.

Let me expand here.

So let's put here, one next to each other.

Look that! She grew up very much alive.

More cute.

O suit him, he became more bluebird.

We had a small difference.

But this difference was not so so stark.

Actually left work even more beautiful.

Well folks, the video was over, I know, chatinho half because I started quite blah blah blah.

But if you've followed this far, thank you.

It is very important that you be interest in learning, to study the applications.

And now, we have started to apply some basic design concepts, in our layouts.

So learn the application is not everything.

But, as I am inker, my main experience is precisely to receive files and terminate them using the applications.

So, we teach what we know, and what we can.

I hope you enjoyed.

Do not forget help, click like and share this video.

See you in the next video.

A big hug! Bye Bye!.

Source: Youtube